FlashForge UV/LCD 405nm Washable Resin – Beige (Wax Red) 1 kg

FlashForge UV/LCD 405nm Washable Resin – Beige (Wax Red) 1 kg

FlashForge Standard Resin is a professionally optimised resin for LCD 3D printers. It provides higher printing efficiency than other resins. The Resin standard has a low shrinkage rate, very good dimensional stability and enables high precision 3D printing. With Flashforge Standard Resin you will get finished designs with fine texture, smooth surface and beautiful detail. Due to its high 3D printing speed and shorter curing time, it allows for higher 3D printing efficiency than other resins. Ensures high strength of 3D printed models and minimal shrinkage.

Instructions before use:

1. Store the resin at room temperature (10-30°C) in a dark, dry and well-ventilated place. Keep out of the reach of children.
2. Shake the resin lightly before use.
3. Gloves must be worn during operation to prevent skin contact. If you accidentally splash the resin on your skin or clothes, rinse it off with running water.
4. It is not recommended to mix different types of resin, as this will result in poor 3D printing quality.
5. Do not pour any leftover resin into the environment to avoid contaminating it.