MakerBot Nylon Carbon Fiber (PA-CF) 1,75 mm Black 0,5 kg

MakerBot Nylon Carbon Fiber (PA-CF) 1,75 mm Black 0,5 kg

MakerBot offers a range of high-quality 3D printing filaments, each with its own unique properties and characteristics. MakerBot filaments are renowned for their quality and reliability, and are designed for use in the most demanding industrial applications.

Here are some of the key benefits of MakerBot Nylon Carbon Filament (PA-CF):

Strength and durability: nylon is known for its high strength and durability. It also offers exceptional tensile strength, enabling the production of robust and reliable 3D printed models.

High temperature resistance: MakerBot Nylon Carbon Filament (PA-CF) has good heat resistance, allowing 3D printed designs to withstand higher temperatures without significant deformation. It has a relatively high glass transition temperature (Tg) compared to standard nylon filaments.

Reduced wear and friction: MakerBot Specialty Nylon (PA) filament is also known for its excellent impact strength, making it suitable for parts that may be subjected to high stress or impact during use.

Chemical resistance: exhibits good resistance to chemicals, oils, greases and some solvents, making it suitable for applications where contact with a variety of substances is expected.

Low friction: the addition of carbon fibres in the filament reduces wear and friction, making it suitable for the manufacture of sliding or moving parts. It offers a low coefficient of friction.

Post-treatment: similar to other nylon filaments, MakerBot Nylon Carbon Fiber (PA-CF) allows post-treatment techniques such as sanding or dyeing to achieve the desired surface finish and aesthetics.

It is important to note that specific recommendations and settings for 3D printing may vary depending on the 3D printer model, nozzle size, etc. It is always advisable to refer to the manufacturer’s guidelines or datasheet for detailed instructions and parameters for 3D printing.

Features:

• Deformation (softening) temperature: 184°C
• Tensile strength (ISO 527): 110 MPa
• Tensile modulus (ISO 527): 7,600 MPa
• Elongation at break (ISO 527): 2%
• Filament diameter: 1,75 mm
• Net weight: 0,5 kg

3D printer compatibility:

• Method
• Method X
• Method X Carbon Fibre

Extruder compatibility:

• Model 1C Extruder
• LABS GEN 2 Experimental Extruder

Supporting material:

• PVA
• SR-30